Congrevape Doge V3 RDA

by Doge

The Doge V3 from Congrevape is the most up to date version of this hugely successful atomizer.

This new and improved RDA has all the great features from the previous Doge atomizers but with the focus of improvement on airflow. The Doge V3 encompasses larger airflow control holes and spinning top cap which makes adjusting the airflow much easier.

This is an elegant, high performance, affordable rebuildable atomizer with a sleek new design built for monster cloud performance.

Made with 304 Stainless Steel and C110 Copper, if you want massive clouds and want to really sub ohm, this RDA is for you no question. Even if you already have something else, this is a one trick pony, but it’s a good one for sure!

The Doge V3 has completely redesigned the overall look, the deck poles, and logo to be more elegant, more efficient in delivery airflow with the positive post reinforced with a peek insulator. The Doge V3 is a combination of superb build quality and amazing airflow options with an affordable price tag!


The Deck
The DOG3 deck is the most significant redesign of the deck yet. V1 and V2 decks were very similar with the post holes and posts enlarged, and the insulator design being upgraded from V1 (round) to V2 (square key). The V3 deck keeps the same great insulator and key design from the V2 as Congrevape had NO warranty repair request tickets for the V2 using the brown japanese peek insulator. There was a large number of complaints about the insulators failing on counterfeit V2 products, this was due to the low quality plastic used for the insulators by counterfeit makers.
In the DOG3 deck we have shrunk the posts down a little bit, to accommodate the most common configurations used, and increasing the build space. The negative post holes are 2.2mm, as well as the dual hole center post. This will easily accommodate 20g wire. The single center post is 3mm so that it may accommodate two wires being crimped down simultaneously.
The DOG3 juice well has been increased substantially, the prior V2 juice well was 4.5mm deep. With the newest release, the DOG3 juice well expands into 9mm deep. This is done using very clever placement tricks of the center pin design,and robust nature of the compact PEEK insulator to free up as much usable space in the deck for the most juice volume attainable.
The airflow of the DOG3 has been redesigned to be controlled on the inside using the deck for the AFC control block. Changing this configuration has allowed us to improve a large number of features on this release.
* Deeper Juice Well
* Larger build space, 2.5mm more before the coil strikes the outside wall
* Reduced thermal transfer from the coil to the top cap & tip
* Easier alignment of coils while building to match Airflow direction

Doge V3 RDA by Congrevape Specification:

  • 22mm OD RDA
  • All new top cap design
  • Extra wide mouth piece
  • Removable heat sink cap
  • Large cyclops airflow holes
  • Easy controlled airflow
  • Tri-post design
  • Silver-plated copper pin
  • Ceramic High-Polish Tip
  • Genius Doge Airflow
  • 3 & 4 Post Design
  • 2mm Post Holes

Package includes:

  • Doge V3 RDA by Congrevape
  • Multiple Screws
  • O-Rings
  • Insulator
  • Screwdriver
Note: When it comes to using RDA, we are strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products. This product is for experienced users.
Avaliable colours:
  • Stainless
  • Black/Pink
  • Black/Green
  • Black/Blue